MANU6010 - Building Services Project

Module Details

Module Code: MANU6010
Title: Building Services Project
Long Title: Building Services Project
NFQ Level: Fundamental
Valid From: Semester 1 - 2016/17 ( September 2016 )
Duration: 1 Semester
Credits: 5
Field of Study: 5400 - Manufacturing Engineering
Module Delivered in: 3 programme(s)
Module Description: This module has been designed to allow the planning, design, drawing and budgeting for the mechanical building services for a small factory unit. Services include hot and cold water, low pressure hot water heating, ventilation system.
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Plan for the execution of a design project for mechanical building services in a small industrial building.
LO2 Design mechanical building services under guidance using standard techniques.
LO3 Represent mechanical building services graphically using industry standard IT tools
LO4 Produce a budget for the installation of mechanical building services.
LO5 Produce a project brief to communicate engineering requirements to other technically qualified personnel
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements

This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
No requirements listed
 
Indicative Content
Planning.
Project schedule, safety plan.
Hot and Cold water
Storage Tanks, calorifiers, vent pipes, labelling.
Low pressure hot water.
Fill and expansion tanks, vent pipes, boilers, circulating pump, radiators, radiant heaters.
Ventilation.
Reasons for ventilation, ventilation grilles.
Budgeting.
Material take off list, unit rates, budget costs, supplier information.
Module Content & Assessment
Assessment Breakdown%
Coursework100.00%

Assessments

Coursework
Assessment Type Project % of Total Mark 10
Timing Week 3 Learning Outcomes 1,5
Assessment Description
Schedule and Safety Plan
Assessment Type Project % of Total Mark 20
Timing Week 5 Learning Outcomes 1,2,3,4,5
Assessment Description
Hot and Cold Water
Assessment Type Project % of Total Mark 30
Timing Week 8 Learning Outcomes 1,2,3,4,5
Assessment Description
Low Pressure Hot Water Heating
Assessment Type Project % of Total Mark 10
Timing Week 10 Learning Outcomes 1,2,3,4,5
Assessment Description
Ventilation
Assessment Type Project % of Total Mark 30
Timing Sem End Learning Outcomes 1,2,3,4,5
Assessment Description
Overall Project Handup
No End of Module Formal Examination
Reassessment Requirement
Coursework Only
This module is reassessed solely on the basis of re-submitted coursework. There is no repeat written examination.

The University reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lab Contact Drawing using CAD package Every Week 2.00 2
Lecture Contact Class based instruction Every Week 1.00 1
Independent & Directed Learning (Non-contact) Non Contact Planning, Design and Budgeting of services Every Week 4.00 4
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 3.00
Workload: Part Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Class based instruction Every Week 1.00 1
Lab Contact Drawing using CAD package Every Week 2.00 2
Independent & Directed Learning (Non-contact) Non Contact Self-directed learning Every Week 4.00 4
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 3.00
 
Module Resources
Recommended Book Resources
  • CIBSE Guide A. (2006), Environmental Design, [ISBN: 978-1-903287-66-8].
  • CIBSE Guide B. (2005), Heating, Ventilating, Air Conditioning and Refrigeration, [ISBN: 978-1-903287-58-3].
  • CIBSE Guide C. (2007), Reference Data, [ISBN: 978-1-903287-80-4].
  • BSRIA. (2011), Rules of Thumb, 5th. [ISBN: 978-0-86022 692 5].
  • BSRIA. (2009), The Illustrated Guide to Ventilation, [ISBN: 978-0-86022-673-4].
  • Fred Hall, Roger Greeno. (2013), Building Services Handbook, 7th. Routledge, [ISBN: 978-0-415-63140-2].
This module does not have any article/paper resources
This module does not have any other resources
 
Module Delivered in
Programme Code Programme Semester Delivery
CR_EBENS_8 Bachelor of Engineering (Honours) in Building Energy Systems 4 Mandatory
CR_EBSEN_7 Bachelor of Engineering in Building Services Engineering 4 Mandatory
CR_EBSEN_6 Higher Certificate in Engineering in Building Services Engineering 4 Mandatory