Module Details

Module Code: NAUT6013
Title: Cargo/Ballast Operations - wp
Long Title: Cargo and Ballast Operations - work placement
NFQ Level: Fundamental
Valid From: Semester 1 - 2013/14 ( September 2013 )
Duration: 1 Semester
Credits: 5
Field of Study: 5253 - Nautical Science
Module Delivered in: 2 programme(s)
Module Description: This module will prepare the Learner to take responsibility for the preparation of the cargo compartments and supervision of the loading and discharging operations of the vessel. As a work placement module this will be completed under the supervision of a Qualified Officer.
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Perform as a team member of the ships personnel in the preparation of a cargo space to receive cargo
LO2 Calculate and assess the vessel's stability and hull stresses at the end of a loading operation
LO3 Describe a ballast and deballast operation on board ship
LO4 Inspect cargo space on completion of discharge and report defects or damages
LO5 Descibe a loading and unloading cargo operation on board ship
LO6 Reflect on the learning experience
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements

This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
This is a work placement module which is conducted on board ship. Learners can not proceed to sea unless they have successfully completed NAUT6035 Seafarer Basic Safety Training and possess a Seafarer Medical Certificate (ENG 11)
 
Indicative Content
Ballast Operations
Setting up ballast lines. Operation of ballast pumps and eductors. Stripping ballast tanks. Sounding round. Loading and discharging ballast by gravity.
Cargo Space Preparation
Methods of cleaning cargo spaces. Testing and protection of hold bilges. Rigging cargo clusters. Dunnage and spar ceiling. Cargo securing equipment. Display of warning notices.
Stability calculations
Use of vessel stability booklet. Use of vessel stability computer. Draft surveys.
Cargo Space Inspection
Inspection of cargo hold/tank prior to loading and after discharging. Testing hold bilges. Testing and inspection of fire/smoke detection system. Examination of spar ceiling and dunnage. Testing of hatch/tank cover seals. Inspection of ladders and access points. Operation and testing of hold ventilation systems.
Loading/unloading
Loading and unloading operations. Methods of securing cargo and the Cargo Securing Manual. Cargo seperation and segregation. Dangerous goods and the IMDG Code. Tanker operations.
Module Content & Assessment
Assessment Breakdown%
Coursework100.00%

Assessments

Coursework
Assessment Type Written Report % of Total Mark 20
Timing Week 2 Learning Outcomes 5
Assessment Description
This activity will be carried out under the guidance of a qualified officer. The report on the cargo operation will be verified by the Training Officer and submitted to NMCI for assessment
Assessment Type Written Report % of Total Mark 10
Timing Week 4 Learning Outcomes 1
Assessment Description
This activity will be carried out under the guidance of a qualified officer. The report in preparing a cargo space will be verified by the Training Officer and submitted to NMCI for assessment
Assessment Type Reflective Journal % of Total Mark 10
Timing Every Week Learning Outcomes 6
Assessment Description
Verified by the Training Officer and submitted to NMCI for assessment
Assessment Type Written Report % of Total Mark 20
Timing Week 6 Learning Outcomes 3
Assessment Description
This activity will be carried out under the guidance of a qualified officer. The report on the ballast operations will be verified by the Training Officer and submitted to NMCI for assessment
Assessment Type Written Report % of Total Mark 20
Timing Week 8 Learning Outcomes 2
Assessment Description
The calculations will be verified by the Training Officer and the report submitted to NMCI for assessment
Assessment Type Written Report % of Total Mark 20
Timing Week 10 Learning Outcomes 4
Assessment Description
This activity will be carried out under the guidance of a qualified officer. The report on the inspection of the cargo hold will be verified by the Training Officer and submitted to NMCI for assessment
No End of Module Formal Examination
Reassessment Requirement
Coursework Only
This module is reassessed solely on the basis of re-submitted coursework. There is no repeat written examination.

The University reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Independent & Directed Learning (Non-contact) Non Contact Work placement Every Week 5.70 5.69999980926514
Lecturer-Supervised Learning (Contact) Contact Work placement supervision Every Week 1.30 1.29999995231628
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 1.30
This module has no Part Time workload.
 
Module Resources
Recommended Book Resources
  • DJ House. (2007), Seamanship Techniques, third. Butterworth/Heinemann, London, [ISBN: 9180750663151].
  • IMO. (2012), IMSBC Code, 2012. [ISBN: 9789280115352].
  • IMO. (2012), IMDG Code, 2012. IMO, London, [ISBN: 9789280115611].
Recommended Article/Paper Resources
  • Shipboard Reference document. Shipboard Safety Management System.
  • Shipboard Reference document. Ballast/pipeline plans.
  • Shipboard Reference document. Cargo Securing Manual.
This module does not have any other resources
 
Module Delivered in
Programme Code Programme Semester Delivery
CR_MSMAN_6 Certificate in Seamanship 1 Mandatory
CR_SNASC_6 Higher Certificate in Science in Nautical Studies 1 Mandatory