Module Details

Module Code: BIOE6002
Title: Biomechanic,Statics & Dynamics
Long Title: Biomechanics, Statics and Dyna
NFQ Level: Fundamental
Valid From: Semester 1 - 2016/17 ( September 2016 )
Duration: 1 Semester
Credits: 5
Field of Study: 5212 - Biomedical Engineering
Module Delivered in: 2 programme(s)
Module Description: Multiaxial stresses and deformations, Simple torsion theory, Simple Bending theory and principals of equilibrium are introduced and applied in the field of Biomechanics. Kinetics of human motion is also introduced
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Calculate stresses and deformations in materials elements subjected to multiaxial loading
LO2 Apply classical mechanics theories to biomechanical applications and calculate stresses and deformations
LO3 Analyse linear human motion using kinetics
LO4 Perform a range of Mechanics Laboratory Experiments as part of a team in a safe and appropriate manner, document results, research and apply relevant theories and report the results.
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
9596 MECH6029 Mechanics
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements

This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
No requirements listed
 
Indicative Content
Application of Statics to Human Biomechanics
Mechanics of the Elbow, Shoulder, Spinal Column, Hip, Knee, Ankle.
Multiaxial Deformations and Stress Analysis
Poisson’s Ratio, Biaxial and Triaxial Stresses, Stress Transformation, Allowable Stress and Factor of Safety, Fatigue and Endurance, Stress Concentration.
Torsion of Circular Shafts and Bones
Introduction to Simple Torsion Theory. Polar Second Moment of Area. Torsional rigidity, Section Modulus. Torsion of thin-walled tubes. Torsion of Bones
Bending of Beams
Introduction to Simple Bending Theory. Application of Classical Flexural Formula. Neutral Axis, Section Modulus, Second Moment of Area. Combined bending and direct stress-eccentric loading. Combined Bending and Torsion of human bones.
Linear Kinetics
Equations of Motion, Special cases of Translational Motion, Work and Energy Methods, Mechanical Work, Mechanical Energy, Work-Energy Theorm, Conservation of Energy Principle, Power, Application of Energy Methods, Linear Kinetics of Human Movement
Laboratory experiments
Students to complete 5 laboratory experiments from the following list: 1.Deflection of Simply Supported beam. 2.Verification of Classical Flexural Formula. 3.Verification of Classical Torsional Formula. 4.Measurement of Modulus of Elasticity and Poisson’s Ratio using strain gauges. 5.Moment of Inertia by Trifilar and Compound Pendulum methods. 6.Modulus of Rigidity by Torsion Test.
Module Content & Assessment
Assessment Breakdown%
Coursework30.00%
End of Module Formal Examination70.00%

Assessments

Coursework
Assessment Type Short Answer Questions % of Total Mark 10
Timing Week 6 Learning Outcomes 1,2
Assessment Description
In-class closed book assessment on biomechanics
Assessment Type Practical/Skills Evaluation % of Total Mark 20
Timing Every Week Learning Outcomes 4
Assessment Description
Laboratory experiments and reports
End of Module Formal Examination
Assessment Type Formal Exam % of Total Mark 70
Timing End-of-Semester Learning Outcomes 1,2,3
Assessment Description
End-of-Semester Final Examination
Reassessment Requirement
Repeat examination
Reassessment of this module will consist of a repeat examination. It is possible that there will also be a requirement to be reassessed in a coursework element.

The University reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Formal lectures Every Week 4.00 4
Lab Contact Laboratory experiments Every Second Week 1.00 2
Independent & Directed Learning (Non-contact) Non Contact Self directed learning and laboratrory report preparation Every Week 2.00 2
Total Hours 8.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 5.00
Workload: Part Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Formal lectures Every Week 3.00 3
Lab Contact Laboratory experiments Every Second Week 1.00 2
Independent & Directed Learning (Non-contact) Non Contact Self directed learning and laboratory report preparation Every Week 3.00 3
Total Hours 8.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 4.00
 
Module Resources
Recommended Book Resources
  • Nihat Özkaya, Margareta Nordin, David Goldsheyder, Dawn Leger. (2012), Fundamentals of Biomechanics, 3rd. Springer-Verlag, New York, [ISBN: 978-1-4614-11].
Supplementary Book Resources
  • J. L. Meriam, L. G. Kraige, J. N. Bolton,. (2015), Engineering Mechanics: Dynamics, 8th. Wiley, p.736, [ISBN: 1118885848].
  • J. L. Meriam, L. G. Kraige, J. N. Bolton. (2015), Engineering Mechanics: Statics, 8th. Wiley, p.528, [ISBN: 1118807332].
This module does not have any article/paper resources
This module does not have any other resources
 
Module Delivered in
Programme Code Programme Semester Delivery
CR_EBIME_7 Bachelor of Engineering in Biomedical Engineering 3 Mandatory
CR_EBIME_6 Higher Certificate in Engineering in Biomedical Engineering 3 Mandatory