Module Details
Module Code: |
PHYS7031 |
Title: |
Material Physics and Design
|
Long Title:
|
Material Physics and Design
|
NFQ Level: |
Intermediate |
Valid From: |
Semester 1 - 2023/24 ( September 2023 ) |
Field of Study: |
4411 - Physics
|
Module Description: |
Describes the properties of a range of materials and explains their behaviour based on the underlying principles of physics.
|
Learning Outcomes |
On successful completion of this module the learner will be able to: |
# |
Learning Outcome Description |
LO1 |
Interpret basic empirical data regarding material properties and consequently predict material behaviour. |
LO2 |
Describe and evaluate material strengthening/hardening and destructive/non-destructive testing methods for particular materials. |
LO3 |
Describe materials, process attributes and design requirements for particular applications. |
LO4 |
Determine the sustainability of processes used to manufacture and reuse materials. |
Dependencies |
Module Recommendations
This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
|
|
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
|
No incompatible modules listed |
Co-requisite Modules
|
No Co-requisite modules listed |
Requirements
This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
|
No requirements listed |
Indicative Content |
Bonding related properties.
Properties influenced by chemical bonding and crystal structure. Electrical (conductors, semiconductors
and insulators), thermal expansion, thermal conductivity, optical, mechanical (strength, ductility, elasticity,
hardness and wear), melting points. Definitions, units, typical values and empirical evaluations.
|
Strength of solids and material testing techniques.
Strength and surface energy. Cracks and stress concentrations. Griffiths crack theory. Toughness in non-metals, the weak interface. Dislocations and ductility. Fatigue and creep. Point defects. Hardening techniques. Diffusion in solids. Survey of material testing techniques: Radiography, Ultrasonic, Eddy currents, hardness (Brinell, Rockwell, Vickers), impact testing, adhesion testing, tensile test.
|
Metals and alloys
Lattice types, polymorphism. Alloys: binary alloys of the common metals; Solid solution strengthening, Interstitial vs substitutional. Dispersion strengthening, phase rule; phase diagrams. Interpretation of microstructures for irons and steels, brasses and bronzes and simple alloys of aluminium, lead/tin. Methods employed to increase hardness. Processing and fabrication routes for metals; casting, forming and joining. Classification of steels.
|
Polymers, Ceramics & Composites.
Polymers: Molecular structure, microstructure; crystalline and amorphous polymers. The glass transition temperature. Mechanical behaviour; yielding and fracture. Polymerisation techniques and polymer processing. Chemical properties; degradation, permeability, solubility. Electrical and optical properties. Action of additives; light stabilisers, flame-retardants.
Ceramics: Classification, traditional ceramics, glasses, engineering ceramics. Structures of ceramics. Processing and fabrication routes for ceramics and glasses. Structural Ceramics: Alumina, PSZ, Silicon Carbide, Silicon Nitride, Sialons. Functional Ceramics: electroceramics, bioceramics, ceramic magnets.
Composite Properties: toughening, fracture, elastic behaviour, Dispersion strengthened, particle reinforced and fibre reinforced composites. Commercial composites; Metal Matrix composites, Polymer Matrix Composites, Ceramic Matrix composites.
|
Sustainable Materials and Processes for Manufacturing and Reuse.
The role of materials in mechanical design from the stone age to the synthetic age; economic advantage; materials as liberators; environmental degradation and destruction. The role of materials in today's environment:
direct; indirect. Costs: manufacturing; social; other. Use material selection charts to identify the material class appropriate for a particular application. Trends in consumption and manufacturing. Sintering. Coating. Surface modification: ion implantation, vacuum and high pressure plasma modification. Green nanotechnologies for the manufacture and reuse of materials.
|
Module Content & Assessment
|
Assessment Breakdown | % |
Coursework | 100.00% |
Assessments
No End of Module Formal Examination |
Reassessment Requirement |
Coursework Only
This module is reassessed solely on the basis of re-submitted coursework. There is no repeat written examination.
|
The University reserves the right to alter the nature and timings of assessment
Module Workload
Workload: Full Time |
Workload Type |
Contact Type |
Workload Description |
Frequency |
Average Weekly Learner Workload |
Hours |
Lecture |
Contact |
No Description |
Every Week |
2.00 |
2 |
Lab |
Contact |
Materials Laboratory |
Every Second Week |
1.00 |
2 |
Independent & Directed Learning (Non-contact) |
Non Contact |
No Description |
Every Week |
3.00 |
3 |
Lecturer-Supervised Learning (Contact) |
Contact |
No Description |
Every Week |
1.00 |
1 |
Total Hours |
8.00 |
Total Weekly Learner Workload |
7.00 |
Total Weekly Contact Hours |
4.00 |
This module has no Part Time workload. |
Module Resources
|
Recommended Book Resources |
---|
-
William D. Callister Jr., David G. Rethwisch. (2014), Materials Science and Engineering : An Introduction, 9. p.984, [ISBN: 9781118319222].
-
Michael Ashby. (2010), Materials Selection in Mechanical Design, 4. Elsevier Butterworth-Heinemann, p.640, [ISBN: 9780080952239].
-
Michael F. Ashby. (2013), Materials and the Environment, 2. 15, Elsevier, p.628, [ISBN: 9780123859716].
| This module does not have any article/paper resources |
---|
Other Resources |
---|
-
website (E-book), Julian M Allwood & Jonathan M Cullen. (2012), Sustainable Materials: With Both Eyes
Open, Cambridge, UIT Cambridge Ltd,
-
Education and Teaching Resources, Mike Ashby Eco Audit, website, Granta Design,
|
|