INTR7019 - Revit MEP and BIM

Module Details

Module Code: INTR7019
Title: Revit MEP and BIM
Long Title: Revit MEP and BIM
NFQ Level: Intermediate
Valid From: Semester 1 - 2021/22 ( September 2021 )
Duration: 1 Semester
Credits: 5
Field of Study: 5213 - Interdisciplinary Engineering
Module Delivered in: 1 programme(s)
Module Description: This module will develop the learners knowledge of the multi-disciplinary nature of Building Information Modelling (BIM). The learner will become familiar with fundamental aspects of a BIM approach within the architecture, engineering and construction (AEC) sector. The focus for this module will be on the engineering services and construction elements of the building process and the practical application of relevant proprietary modelling software.
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Identify and create an appropriate Mechanical Electrical Plumbing (MEP) system within a 3D model of a building using proprietary software.
LO2 Manage multi-disciplinary project models within a common data environment (CDE) and assess constructability.
LO3 Extract the necessary information from a multi-disciplinary 3D model in order to develop associated 4D and 5D models.
LO4 Interpret as built laser scan points file to compare completed as built construction to virtual model.
LO5 Develop and present in an appropriate format the completed building information model data.
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
14199 INTR7019 Revit MEP and BIM
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
No incompatible modules listed
Co-requisite Modules
No Co-requisite modules listed
Requirements

This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
No requirements listed
 
Indicative Content
Building Information Modelling (BIM)
General principles; Methodologies; Technologies; Levels of Development (LOD's); Information delivery cycle highlighting the need for proper documentation and clear definition of requirements (PAS 1192); International BIM Standards including ISO 19650 series; Industry Foundation Classes (IFC's); Construction Operations Building Information Exchange (COBie); Uniclass 2 coding system; Common Data Environment (CDE); BIM development within industry.
Mechanical, Electrical, Plumbing (MEP) Services 3D Model
Development of an architectural 3D building model to include appropriate data enriched MEP service elements to enable element design using Autodesk Revit (or alternative proprietary software); Levels of Development (LOD's); Information delivery cycle highlighting the need for proper documentation and clear definition of requirements (PAS 1192 and/or I.S. ISO 19650).
Interdisciplinary Model Comparison
Comparison of multidisciplinary models using Navisworks (or alternative proprietary software).
Financial & Construction Programme Considerations
Development of 4D and 5D models to represent indicative construction programme and project cash flow requirements respectively.
Module Content & Assessment
Assessment Breakdown%
Coursework100.00%

Assessments

Coursework
Assessment Type Project % of Total Mark 35
Timing Week 5 Learning Outcomes 1,2
Assessment Description
Model the required MEP elements for a building project based on engineer's instructions.
Assessment Type Project % of Total Mark 45
Timing Week 10 Learning Outcomes 2,3,4
Assessment Description
Identify constructability issues for multi-disciplinary models of a building. Produce indicative 4D (i.e. indicative construction programme) and 5D (i.e. cash flow) models for a building project based on a 3D computer model.
Assessment Type Project % of Total Mark 20
Timing Week 13 Learning Outcomes 2,5
Assessment Description
Present in an appropriate format the completed building information model in conjunction with file management system.
No End of Module Formal Examination
Reassessment Requirement
Coursework Only
This module is reassessed solely on the basis of re-submitted coursework. There is no repeat written examination.

The University reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Delivery of module content. Every Week 0.50 0.5
Lab Contact Delivery of practical instruction and completion of exercises/assignments. Every Week 3.50 3.5
Independent & Directed Learning (Non-contact) Non Contact Revision of module content and completion of assignments. Every Week 3.00 3
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 4.00
Workload: Part Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Delivery of module content. Every Week 0.50 0.5
Lab Contact Delivery of practical instruction and completion of exercises/assignments. Every Week 3.50 3.5
Independent & Directed Learning (Non-contact) Non Contact Revision of module content and completion of assignments. Every Week 3.00 3
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 4.00
 
Module Resources
Recommended Book Resources
  • Rafael Sacks, Chuck Eastman, Ghang Lee, Paul Teicholz. (2018), BIM Handbook: A guide to Building Information Modelling for owners, managers, designers, engineers, and contractors, Third. John Wiley, Hoboken, New Jersey, USA, p.648, [ISBN: 978111928753].
  • Dominik Holzer. (2016), The BIM Manager's Handbook : Guidance for Professionals in Architecture, Engineering, and Construction, First. John Wiley & Sons Inc, New York, United States, [ISBN: 9781118982426].
  • Lance Kirby, Eddy Krygiel, and Marcus Kim. (2017), Mastering Autodesk Revit 2018, John Wiley & Sons, [ISBN: 9781119386728].
This module does not have any article/paper resources
Other Resources
 
Module Delivered in
Programme Code Programme Semester Delivery
CR_EESMG_7 Bachelor of Science in Engineering Services Management 4 Mandatory