NAUT6006 - Seamanship

Module Details

Module Code: NAUT6006
Title: Seamanship
Long Title: Seamanship for Trainee Deck Officers
NFQ Level: Fundamental
Valid From: Semester 1 - 2014/15 ( September 2014 )
Duration: 1 Semester
Credits: 5
Field of Study: 5253 - Nautical Science
Module Delivered in: 1 programme(s)
Module Description: This is a theoretical and practical course that introduces the student to the practical elements of ships' operations. It gives students the basic seamanship skills to allow them to assist in the following operations: anchoring and mooring, in-port watch keeping, working safely on deck, maintenance requirements and other shipboard routines, including personal safety and responsibility.
 
Learning Outcomes
On successful completion of this module the learner will be able to:
# Learning Outcome Description
LO1 Select and tie the appropriate nautical knots and rigging
LO2 Describe mooring and anchoring procedures
LO3 Describe the procedures involved in port operations
LO4 Explain the guidelines relating to safe working practices onboard ship
LO5 Describe routine deck maintenance aboard ship
LO6 Describe a seafarer's personal safety and social responsibilities onboard ship
Dependencies
Module Recommendations

This is prior learning (or a practical skill) that is strongly recommended before enrolment in this module. You may enrol in this module if you have not acquired the recommended learning but you will have considerable difficulty in passing (i.e. achieving the learning outcomes of) the module. While the prior learning is expressed as named MTU module(s) it also allows for learning (in another module or modules) which is equivalent to the learning specified in the named module(s).
None
Incompatible Modules
These are modules which have learning outcomes that are too similar to the learning outcomes of this module. You may not earn additional credit for the same learning and therefore you may not enrol in this module if you have successfully completed any modules in the incompatible list.
None
Co-requisite Modules
No Co-requisite modules listed
Requirements

This is prior learning (or a practical skill) that is mandatory before enrolment in this module is allowed. You may not enrol on this module if you have not acquired the learning specified in this section.
None
 
Indicative Content
Nautical Knots, bends and hitches
Nautical Terminology. Cordage. Types of rope. Use and care of rope. Characteristics of ropes. Nautical knots, bends and hitches and their use onboard ship. Whipping. Splicing. Rope and wire stoppers. Rigging bos'n's chair and stage hitch.
Port operations
Procedures relating to maintaining a deck watch in port. Preparation of holds to receive cargo. Alarms and communication equipment. Sounding of tanks and bilges. Prevention of pollution during cargo operations. Hatches and watertightness. Securing the Vessel for sea.
Mooring and Anchoring
Mooring and anchoring equipment. Mooring and anchoring operation procedures. Precautions while mooring and anchoring. Use of Tugs.
Means of Access
Gangways. Accommodation Ladders. Pilot Ladders. Other approved means of access/egress. Required safety equipment.
Safe working practices
Relevant sections of Marine Notices. Code of Safe Working Practices for Merchant Seamen. Maintenance equipment. Safety precautions while working onboard. Guidelines relating to safe working practices and safe movement aboard ship. Working at a height or over side. Personal Protective equipment and clothing. Risk assessment. Permit to work procedures.
Maintain steelwork and deck equipment
Identification and application of paints. Paint types and uses. Preparation of surfaces. Identification of work area, tools and materials. Safe use and stowage of materials.
Personal Safety and Social Responsibilities
Types of emergencies and actions to take. Emergency signals and use of safety equipment. Value of drills and training. Importance of safe working practices. Effective communication. Precautions on entering enclosed spaces. Use of Lock-out/Tag-out system. Pollution prevention. Drug and alcohol policy. Employee relations.
Module Content & Assessment
Assessment Breakdown%
Coursework50.00%
End of Module Formal Examination50.00%

Assessments

Coursework
Assessment Type Short Answer Questions % of Total Mark 15
Timing Week 7 Learning Outcomes 2,3,4,5
Assessment Description
Written
Assessment Type Practical/Skills Evaluation % of Total Mark 25
Timing Week 11 Learning Outcomes 1
Assessment Description
Practical evaluation of knots, bends, hitches and rigging.
Assessment Type Multiple Choice Questions % of Total Mark 10
Timing Sem End Learning Outcomes 6
Assessment Description
Multiple choice questions at the end of the Personal Safety and Social Responsibilities element
End of Module Formal Examination
Assessment Type Formal Exam % of Total Mark 50
Timing End-of-Semester Learning Outcomes 2,3,4,5
Assessment Description
End-of-Semester Final Examination
Reassessment Requirement
Repeat examination
Reassessment of this module will consist of a repeat examination. It is possible that there will also be a requirement to be reassessed in a coursework element.

The University reserves the right to alter the nature and timings of assessment

 

Module Workload

Workload: Full Time
Workload Type Contact Type Workload Description Frequency Average Weekly Learner Workload Hours
Lecture Contact Theory Every Week 2.00 2
Lab Contact Practical Every Week 2.00 2
Independent & Directed Learning (Non-contact) Non Contact No Description Every Week 3.00 3
Total Hours 7.00
Total Weekly Learner Workload 7.00
Total Weekly Contact Hours 4.00
This module has no Part Time workload.
 
Module Resources
Recommended Book Resources
  • D.J. House. (2004), Seamanship Techniques, 3rd. Elsevier Butterwroth Heinemann, UK, [ISBN: ISBN 07506 63154].
  • C. H Wright. (2012), The Efficient Deck Hand, 5th. Brown Son and Ferguson, [ISBN: 978-1-84927-028-1].
  • Angus Ferguson. (2004), Seamanship Notes, 1st. Witherby Seamanship, p.190, [ISBN: 0953437965].
  • M.C Armstrong. (2012), Pilot Ladder Safety, 6th. Brown Son and Ferguson, [ISBN: 978-1-84927-046-5].
  • Michael Lloyd. (2009), Pocket Book of Anchoring, 1st. Witherby Seamanship, p.86, [ISBN: 1-905331-45-2].
Supplementary Book Resources
  • Stationery Office (Great Britain),. (2010), Code of Safe Working Practices for Merchant Seamen, Nov 2011. [ISBN: 9780115531668].
This module does not have any article/paper resources
This module does not have any other resources
 
Module Delivered in
Programme Code Programme Semester Delivery
CR_SNASC_7 Bachelor of Science in Nautical Science 2 Mandatory